 Products Catalog |
|
 Conveyor Belt |
|
|
|
EP Heat Resistant Conveyor Belt
Application:Ep Heat Resistant Conveyer Belt is suitable for all common Heat Resistant Conveyer Belt application location, mainly used for relatively high temperature materials conveying such as sintering minerals, coke, cement etc. in metallurgical, construction industries.
Features:
1.EP Heat Resistant Conveyer Belt is suitable for the temperature not above 125℃material conveying.
2.EP Heat Resistant Conveyer Belt is manufacture materials. It has high strength, good dimension stability,
suitable for big width, large quantities conveying.
3.Good abrasion resistant, suitable for big block sintering mineral etc. materials.
4.Good groove forming, stable conveying.
5.High belt strength, possible use butt joint mode connection.
6.One times more long life span than common Heat Resistant Conveyer Belt.
7.High bonding strength between laminates, no laminates separation in use.
|
| |
| Main Specification and Main Technical DataLCompare with EP200): |
Item |
EP High Temp. Heat Resistant Belt |
Common High Temperature Heat Resistant Belt |
Longitudinal Pulling strength≥KN/m |
3 Layer |
600 |
150 |
4 Layer |
800 |
200 |
5 Layer |
1000 |
250 |
6 Layer |
1200 |
300 |
7 Layer |
1400 |
350 |
8 Layer |
1600 |
400 |
Elongation Rate (Reference) |
≤1.5% |
≤3% |
Pulling Strength of Covering Rubber(Mpa) |
≥14 |
≥10 |
Covering Rubber Consumption(Mpa) |
≤0.4 |
≤0.5 |
Bonding Force between layers(M/mm) |
≥12 |
≥4.5 |
|
| |
|
