Raised edge conveyor belt is often used in order to prevent scatterance of conveyed materials. The belt is composed of belt and raised edge.
Its structure and performance are as follows:
Name
Shape of the raised edge
Purpose
Straight-strip raised edge
conveyor belt
There is a straight-strip
raised edge higher than belt on either side of the belt. The
height of the raised edge is 10 - 30mm.
It can convey powder, granular,
paste and liquid materials which scatter easily.
Wedge-type raised edge
conveyor belt
There is non-connecting wedge-type
raised edge higher than belt on either side of the belt. The
height of raised edge is about 20 - 80mm.
It can convey powder, granular
and small lump materials which scatter easily.
Wavy raised edge
conveyor belt
There is continuous wavy raised edge higher
than belt on either side of the belt. The height of the raised
edge is about 60 - 200mm.
It can convey powder, granular small lump,
paste and liquid materials which scatter easily.
The width of raised edge conveyor belt which the corporation can provide is no more than 3100mm.
According to the tensile strength of the raised edge conveyor belt, it includes such models as M, L and H.
The tensile strength of each model is as follows:
Tensile Strength
Conventional-type
(Model M)
Strength-type
(Model L)
High-strength-type
(Model H)
N/layer (mm)
54.9
196
294
KGF/layer (cm)
56
200
300
We can provide such products as conventional-type, heat-resistance type (<= 120°C), cold-resistance type (>= -40°C), acid and alkali resistance type, static electricity, conductive-type, high-temperature resistance type (<= 180°C) and hygiene-type, etc. According to performance in service.
We can make trial production of the raised edge conveyor belt with other kind of raised edge or special performance and requirements.
