|
|
1.Cord sand blast rubber hose
Use: Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball.
Characteristics: The inside layer is wear-resisting and the outside layer good at anti-aging and wear-resistance.The burst pressure of the hose is four times or more higher than the working pressure. |
 |
| |
|
| |
|
|
| |
2.Wire braid sand Blast rubber hose
Use: Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball.
Characteristics: The inside layer is weaw-resisting and the outside layer good at anti-aging and wear-resistance.The burst pressure of the hose is fourtimes or more higher than the working pressure. |
 |
|
| |
|
|
| |
3.Wear-resistant suction rubber hose
Use: Used to take out and suck solid materials or grain materials such as mineral sand,bits of coal and cereal(rice,whe at,corn) etc.
Characteristics: The inside layer of the hose is good in flexibility and wear-resistance,while the outside layer is excellently anti-aging and wear-resisting.The hose has the double properties of bearing both the positive and negative pressure canbe used normallyunder the pressure of-80kpa(600mm mercury)at the vacuum The burst pressure of the hose is four times of more higher thanthe working pressure. |
|
| |
|
| |
|
|
| |
|
