Brake hose is a hose compatible with brake fluid and is a part of the automotive braking system, mainly to transfer the braking medium in the automotive braking, to ensure that the braking force is transferred to the automotive brake caliper so that the braking is effective at any time.
The performance of the brake hose determines the braking strength of the traveling vehicle. Therefore, the quality of brake hoses is crucial for high-speed vehicles. Regular inspection and timely replacement are vital to the driving safety of the vehicle.
Our brake hoses are highly abrasion-resistant, DOT-approved, have a long service life, and can be matched with appropriate fittings that can be crimped in the field.
Send Inquiry
Brake hoses can be categorized according to their functions, mainly:
- Air brake hose
- Hydraulic brake hose
- Vacuum brake hose
What does the brake hose do?
Brake hoses play a vital role in the car’s brake system. As the wheels move, the brake cylinders move with them, which requires the brake lines to be soft, resilient, and resistant to high pressure.
Brake hoses must be able to bend with the movement of the brake cylinders to ensure that the brake pressure can be transmitted smoothly and complete the transmission of braking force.
How long do rubber brake hoses last?
The service life of the brake hose is usually between 30,000 and 60,000 kilometers, and the service life is usually about 6 years. It depends on many factors, including mileage, driving habits, road conditions, and installation conditions.
What happens when a rubber brake line goes bad?
A broken brake line hose usually has the following manifestations, which require special attention:
1. Braking deviation
If the vehicle is found to be running off the track during braking, it is likely caused by the imbalance of braking force on both sides. The brake hose on one side may be damaged, such as dents, blockages or oil leakage.
2. Soft brake feel
When there is a problem with the brake hose, the brake feel may be significantly softer during braking. This is usually caused by excessive water or insufficient oil in the brake fluid, especially oil leakage in the brake hose, which will not only reduce the oil, but also cause the tube body to burst, causing brake failure.
3. Longer braking distance
If the braking distance is significantly longer, you should also be alert. This may be because the brake hose expands under the sudden increase in oil pressure, weakening the braking force of the front section. At the same time, aging of the brake hose may also cause tube body bursts, bulges, oil leakage and other faults, which may cause complete failure of the brake in severe cases.
4. Abnormal hose appearance
If the hose has bulges, cracks, or oil leakage in severe cases, or if the brake joint is rusted or leaking, the brake hose should be replaced immediately.
It is recommended that you check the integrity of the brake hose regularly and handle the above abnormalities in a timely manner to ensure driving safety.
What is the best material to use for brake lines?
Common brake hose materials
1. Rubber material: Rubber is one of the most commonly used materials for brake hoses. It has good flexibility and oil resistance, and can withstand the pressure and temperature changes of brake fluid. Especially EPDM, in addition, rubber material also has good wear resistance and corrosion resistance, which can meet the needs of long-term use.
2. Nylon material: Nylon brake hose has high compressive strength and corrosion resistance, and also has good high temperature resistance. This material hose is usually used in high-performance vehicles or racing cars to cope with more demanding working environments.
3. Polytetrafluoroethylene (PTFE) material: PTFE is a high-performance plastic material with excellent chemical corrosion resistance and low friction coefficient. In brake hoses, PTFE material can provide excellent wear resistance and durability, suitable for harsh working environments.
How much does it cost to replace a brake hose?
The price of brake hoses varies depending on the material, brand, and model. The price of ordinary rubber brake hoses is about RMB 60 to 120, while the price of original brake hoses may be higher. For some special models or high-end models, the price may reach several hundred yuan or even higher.
Can you drive with a broken brake hose?
If there is a problem with the brake hose, such as aging, cracking or loose connection, it may cause brake failure and increase the risk of accidents. Once there is a problem with the brake hose, it is recommended not to drive the car. Regular inspection and replacement of brake hoses is an important step to keep the vehicle safe.
