SAE 100 R1AT / EN 853 1SN Steel Wire Braided Hydraulic Hose
SAE 100 R1 single wire braided hydraulic hose is widely used to transport petroleum-based or water-based hydraulic oil. The high tensile strength of the steel wire as the reinforcement layer enables the hose to withstand higher pressure and can be used in medium and high pressure applications.
We use high-quality rubber and high-strength steel wire braided structure; our hydraulic hoses can withstand extreme pressure and harsh working environment, ensuring stable operation of the system. Our high-quality hydraulic hose has an operating temperature from -40°F to 212°F. SAE 100 R1AT/ EN 853 1SN hydraulic hose can be used in a variety of working environments.
Hydraulic Hose SAE 100R1AT/ EN 853 1SN Construction
SAE 100 R1AT/ EN 853 1SN hydraulic hose has a three-layer structure. The inner tube is made of oil-resistant synthetic rubber, the reinforcement layer is made of a layer of high-strength braided steel wire, providing strong pressure resistance, and the outer layer is made of high-quality synthetic rubber to protect the pipeline from chemicals, ultraviolet rays, etc., making the hose wear-resistant, aging-resistant, and weather-resistant, with a longer service life.
- Inner Tube: Oil resistant synthetic rubber.
- Reinforcement: One braided of high tensile steel wire.
- Cover: Weather and oil resistant synthetic rubber, MSHA accepted.
- Standard: Single wire braided hose conforming to SAE J517
SAE 100 R1AT EN 853 1SN
SAE 100 R1 steel wire reinforced hose cross section
SAE 100R1 hose with smooth surface
Flexible SAE 100R1 hose with small bend radius
1 1/4″ SAE 100 R1AT / EN 853 1SN Hydraulic Hose
SAE 100 R1 hydraulic hose with fittings
SAE100 R1 Hose Technical Specifications
Hydraulic hoses come in a variety of sizes to suit different applications and pressures. The most common sizes are based on the inside diameter (ID) of the hose, including 1/4″ hydraulic hose, 3/8″ hydraulic hose, 1/2″ hydraulic hose, 5/8″ hydraulic hose, 3/4″ hydraulic hose, 1-1/2″ 1SN hydraulic hose etc.
Inside Diameter: 3/16″ to 2″
Working Pressure: 580 PSI (ID=2”) to 3625PSI (ID=3/16”)
Burst Pressure: Up to 14500 PSI (ID=3/16”)
Safety Factor: 4:1
Temperature Range: -40℃ to +100℃ (-40°F to 212°F). Intermittent Service 120°C (248°F)
Applicable Specs: Exceeds EN 853 1SN; SAE 100 R1AT; ISO 1436 1SN/R1AT
Length: For hoses with an inner diameter greater than 1”, a roll is 20m or 40m; for hoses with an inner diameter less than or equal to 1”, a roll is 50m or 100m. Custom lengths are supported, with a minimum order quantity of 500m.
SAE 100R1AT/ EN 853 1SN Chart Data
Common specifications of SAE 100R1AT/EN 853 1SN hydraulic hoses include 3/16″, 1/4″, 5/16″, 3/8″ R1 hydraulic hose, 1/2″, 5/8″, 3/4″, 1″, 1-1/4″, 1-1/2″, and 2″. One roll can be 50 m or 100 m. One roll of hose with an inner diameter greater than 1 inch can be 20 m or 40 m. In addition, the corresponding 00110 ferrule & other hydraulic fittings can be matched according to the size of your hydraulic hose.
What size hydraulic hose do you need?
SAE 100 R1AT / EN 853 1SN Hose Specifications
| Part No. | Size | I.D | O.D | W.P | B.P | B.R | W | L | |||
| Dash | inch | mm | mm | mm | Mpa | psi | Mpa | psi | mm | kgs/m | m |
| 1SN-03 | 3/16" | 4.8 | 4.6-5.4 | 12.5 MAX . | 25 | 3625 | 100 | 14500 | 90 | 0.240 | 50/100 |
| 1SN-04 | 1/4" | 6.4 | 6.2-7.0 | 14. 1MAX . | 22.5 | 3263 | 90 | 13050 | 100 | 0.255 | 50/100 |
| 1SN-05 | 5/16" | 7.9 | 7.7-8.5 | 15.7 MAX . | 21.5 | 3118 | 86 | 12470 | 115 | 0.304 | 50/100 |
| 1SN-06 | 3/8" | 9.5 | 9.3-10.1 | 18.1 MAX . | 18 | 2610 | 72 | 10440 | 130 | 0.390 | 50/100 |
| 1SN-08 | 1/2" | 12.7 | 12.3-13.5 | 21.4 MAX . | 16 | 2320 | 64 | 9280 | 180 | 0.472 | 50/100 |
| 1SN-10 | 5/8" | 15.9 | 15.5-16.7 | 24.5 MAX . | 13 | 1885 | 52 | 7540 | 205 | 0.581 | 50/100 |
| 1SN-12 | 3/4" | 19.1 | 18.6-19.8 | 28.5 MAX . | 10.5 | 1523 | 42 | 6090 | 240 | 0.690 | 50/100 |
| 1SN-16 | 1" | 25.4 | 25.0-26.4 | 36.6 MAX . | 8.7 | 1262 | 34.8 | 5046 | 300 | 0.830 | 50/100 |
| 1SN-20 | 1-1/4" | 31.8 | 31.4-33.0 | 44.8 MAX . | 6.3 | 914 | 25.2 | 3654 | 420 | 1.325 | 20/40 |
| 1SN-24 | 1-1/2" | 38.1 | 37.7-39.3 | 52.1 MAX . | 5 | 725 | 20 | 2900 | 500 | 1.500 | 20/40 |
| 1SN-32 | 2" | 50.8 | 50.4-52.0 | 65.5 MAX . | 4 | 580 | 16 | 2320 | 630 | 1.875 | 20/40 |
SAE is recognized as an important standard for hydraulic hoses, both in terms of the design structure of the hose and the pressure level of the work, the production standard of hose ensures that the hydraulic hose meets the minimum structural requirements. Our hoses meet and exceed SAE standards. We can also produce DIN EN853 1SN/SAE 100R1AT Hydraulic Hose (Smooth Surface) and DIN EN853 1ST/SAE 100R1A with thicker and more durable outer rubber. DIN EN853 1SNK with thinner outer rubber and more compact structure.
Significant Advantages of EN 853 1SN/SAE100 R1 Hydraulic Hose
✅ Good flexibility, easy to install
✅ High cost-effectiveness, suitable for bulk purchase and OEM applications.
✅ Oil-resistant, wear-resistant, weather-resistant, long service life
✅ Strong versatility and international compatibility, complies with international standards such as EN 853 1SN and SAE 100R1AT, and is widely applicable worldwide.
✅ Reliable pressure bearing capacity, suitable for a variety of medium pressure hydraulic systems.
✅ Wide applicable temperature range, can work stably in the range of -40°C to +100°C, and adapt to a variety of climates and working conditions.
✅ OEM/ODM supported; custom printing, colors, and cover (wrapped or smooth) available.
SAE 100R1AT/ EN 853 1SN hydraulic hose main application
SAE 100R1AT/EN 853 1SN hydraulic hose is mainly used for mine hydraulic supports and oil field mining. It is suitable for engineering construction, lifting and transportation, metallurgical forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools, and mechanized and automated hydraulic systems in various industrial sectors to transport petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquids (such as emulsions, oil-water emulsions, water) with a certain pressure (higher pressure) and temperature and liquid transmission to ensure the stable operation of the equipment.
Which industry are you looking for hydraulic hoses for?
Specific common application areas:
Hydraulic hose application
1. Construction machinery
Hydraulic arms and cylinder systems for excavators, bulldozers, loaders and other equipment
2. Agricultural machinery
Hydraulic drive systems in tractors, seeders and sprayers such as lifting devices, steering systems, power output control
3. Industrial hydraulic systems
Factory automation, machine tools, presses, injection molding machines
Suitable for connection between control valves and actuators, requiring medium pressure and flexible installation
4. Construction machinery
Concrete pump trucks, lifting platforms, tunnel construction equipment
5. Truck and automotive equipment
For power output control, lifting systems, tilting systems for jydraulic tailgates, vehicle-mounted cranes, sanitation vehicles, etc.
6. Logistics and warehousing equipment
Forklifts, stackers, automatic lifting equipment
Common medium-pressure hydraulic connections in lifting cylinders and travel systems
7. Light mining and oil and gas equipment
For non-high-pressure areas, such as hydraulic auxiliary control or maintenance circuits
Hydraulic hose for excavator
Why Choose Strongflex
Strongflex lmport and Export Co., Ltd was established in 2006. We have always adhered to the high quality requirements of our products. We have not only won the trust of our customers, but also gradually established the STRONGFLEX brand.
Visit the hydraulic hose factory
We have always strictly required quality inspection from the production process to post-production. We will take this as an opportunity to continuously improve product quality and safety and provide customers with more cost-effective products and services!
hydraulic hose factory
The Strongflex factory is equipped with 20 production lines, with a daily output of 50,000 meters and ample inventory, ensuring timely delivery even for large orders.
Hydraulic hose storehouse
We have obtained ISO 9001:2015 certification and CE certification, and obtained the MSHA certificate in 2024. Our products meet or even exceed international standards. They are tested after production, including pulse test, proof pressure test, burst pressure test, etc. All tests are passed before they are sent to customers.
Customers will receive satisfactory products and maintain high pressure, high wear resistance, high flexibility and long life in the subsequent use process. Of course, you don’t have to worry about after-sales service.
We will be 100% responsible for the hoses we send out !
ISO9001:2015
MSHA
CE Certification
FAQs
What is SAE 100 R1?
SAE 100 R1 is a single-layer steel wire braided hydraulic hose whose structure includes a wear-resistant synthetic rubber inner layer, a high-tensile steel wire braided reinforcement layer, and an oil-resistant, wear-resistant, and weather-resistant synthetic rubber outer layer. SAE 100 R1 is suitable for harsh environmental conditions, areas with severe friction, marine environments, underground or open-pit mining sites.
SAE 100 R is a general term for a type of single-layer steel wire braided hydraulic hose that meets SAE (Society of Automotive Engineers) standards.
What is SAE 100 R1 AT?
SAE100 R1 AT is a hydraulic hose that meets SAE standards. It belongs to the SAE100 R1 hydraulic hose range. AT is one of the high-performance grades. The SAE standard divides R1 hoses into several grades:
SAE 100R1S hose: standard performance
SAE 100R1AT hydraulic hose: higher performance (AT = All Type), which is the more commonly used standard model in R1 hoses.
What are the differences between SAE 100 R1 and SAE 100R1AT?
SAE 100 R1 and SAE 100R1AT are hydraulic hoses that meet SAE standards. They are single-layer steel wire braided hydraulic hoses. SAE 100 R1 hose refers to the general term for single-layer steel wire braided hydraulic hoses, and SAE 100R1AT hydraulic hose is the AT grade model. AT is a specific hydraulic hose model with more stringent performance requirements (such as higher working pressure, durability, etc.), suitable for medium and high pressure hydraulic systems, and widely used in industrial equipment.
When we buy hydraulic hoses, SAE 100R1AT is the model directly displayed on the product. It meets and exceeds the requirements of SAE 100R1 hydraulic hoses.
What is the pressure rating of a SAE 100 R1 hose?
The pressure range depends on the diameter of the hydraulic hose. Inside diameter of SAE R1 hose is 3/16″ to 2″; The working pressure of SAE 100 R1 hose can range from 4 MPa(580 PSi) to 25 MPa(3625 PSi). The larger the diameter, the smaller the pressure range, and the smaller the diameter, the larger the pressure range.
What is the difference between R1 and R2 hydraulic hoses?
The main difference between R1 hydraulic hose and R2 hydraulic hose lies in the structure and performance of their reinforcement layer. The R1 hydraulic hose is composed of one layer of steel wire braid reinforcement. It is suitable for industrial applications that require medium pressure and general durability, such as mining, construction machinery, etc. The R2 hydraulic hose is composed of two layers of steel wire braid reinforcement. It can withstand higher pressure, has stronger durability, and is suitable for more severe working environments.
What is the temperature range of R1 hose?
R1 hose operating temperature range is -40°C to +100°C (-40°F to +212°F), with a maximum of +257°C (+257°F) in intermittent operation.
What is EN 853 1SN?
EN 853 1SN is a European standard that defines the specifications for a single steel wire braided hydraulic hose. It’s a commonly used high-pressure hydraulic hose in fluid power applications, particularly for hydraulic systems in industrial and mobile equipment.
Similarities and differences between SAE 100 R1 and EN853 1SN
SAE 100 R1 and EN 853 1SN are two different hydraulic hose standards, from the United States and Europe respectively. They both describe the requirements for single-layer steel wire braided hydraulic hoses, but there are some differences in technical details and test standards.
The structure of the SAE 100 R1 and EN 853 1SN hydraulic hose is the same, both have a three-layer structure, the inner layer material is synthetic rubber (usually NBR), and the outer layer material is oil-resistant, wear-resistant and weather-resistant synthetic rubber. The reinforcement layer is a single layer of high-strength steel wire braid.
SAE 100 R1 complies with the SAE standard, which is the standard designated by the American Society of Automotive Engineers. The standard authority is SAEJ517 100R1, which is applicable to the US and international markets.
EN 853 1SN complies with the EN standard, which is the standard set by the European Committee for Standardization. The full name of the standard is EN 853 1SN. Applicable to European and international markets.
SAE 100R1 and EN853 1SN have some differences in some parameter standards. Under the same size, SAE 100R1 has a slightly lower working pressure, EN853 1SN has a slightly higher pressure, stricter design, smaller bending radius and better flexibility.
Our hydraulic hose meets both SAE 100R1AT and EN 853 1SN standards, ensuring compatibility with American and European systems. Both can be used interchangeably.
